【Product Introduction】：The spring cone crusher is a medium-to-fine cone crusher equipment. The spring functions as a safety device and affects the crushing force.
【Applicable Materials】：Break through ores and rocks with medium or above hardness, such as iron ore, copper ore, limestone, granite, quartz, etc.
【Product Application】： Break the ores and rocks with medium hardness and above, such as iron ore, copper ore, limestone, granite, quartz, etc.
The moving cone rotates continuously, the crushing process and the unloading process of the material are alternately and continuously carried out along the working surface, and the productivity is high;
The material of the product is relatively uniform, with a cubic shape, and the wear on the working surface of the moving cone is also relatively uniform;
The moving cone and the fixed cone are both upright. When the moving cone swings, there is a parallel belt with equal gap between the moving cone and the fixed cone near the discharge port of the crushing chamber, so that the finished product has a uniform material ratio. The size of the feed port is not large, and all the materials that can be processed are the first crushed materials;
This series of cone crushers adopt dry oil or water sealing methods to prevent dust and impurities from entering the body, thus ensuring the cleanliness of the lubricating oil, prolonging the service life of sliding bearings and thrust ball bearings, and ensuring reliable operation of the machine.
When the cone crusher is working, the motor drives the large bevel gear at the bottom of the eccentric sleeve through the hydraulic coupling and the small bevel gear, so that the eccentric sleeve rotates, causing the cone to swing and crush the material. The main shaft of the crusher does not move, but only supports the spherical tiles to withstand the crushing force. Because the main shaft of the crusher does not move and the eccentric sleeve transmits the crushing force, the structure can withstand greater crushing force and is very suitable for fine crushing and ultra-fine crushing, because the crushing force of ultra-fine crushing is very large. It is estimated that the particle size of its product (for ultra-fine crushed liner) can reach 50^80% when it is open for 5m2.
1. Select the appropriate crushing chamber capacity and appropriate feed size ratio
2. Whether the material is evenly distributed after entering the crushing cavity
3. Keep the discharge opening unobstructed
4. Viscous substances in the material will reduce the overall production efficiency
5. The discharge capacity of the crusher should be consistent with the conveying capacity of the belt conveyor
6. The power recommended by the manufacturer can be used during the recommendation process
|Type||Model||Crushing cone diameter (mm)||Feeding port size (mm)||Maximum feeding size (mm)||Adjustment range of discharge opening (mm)||Motor power (kw)||Production capacity (t/h)|
|Short head type||PYD-600/40||600||40||35||3-13||30||12-23|
The spring cone crusher is a medium-to-fine cone crusher equipment. The spring functions as a safety device and affects the crushing force.
A crusher equipment with high production capacity, large crushing ratio and high crushing efficiency, mainly used for coarse crushing.
A single-rotor ring hammer crusher for processing low-hardness and brittle materials.
The supports at both ends of the cone crusher main shaft, scientific design of crushing chamber, double insurance control of hydraulic and lubricating system.
You can fill in your demand information in the form below, and our technical and sales staff will get in touch with you as soon as possible. In order to ensure that your information can be processed in a timely manner, please be sure to fill in your contact number accurately!